Skip Navigation

How to Remove GPU from Motherboard?

Today I am going to show you how to remove a GPU from a motherboard with easy and simple steps. If you are a beginner and want to change or upgrade your graphics card for your own then this DIY guide is best for you. I will show you all the steps with proper images so you can understand everything with ease. Let’s start!

Preparations

Caution: We are going to perform an electronic device component change so you need to take precautions carefully.

Here are the precautions for the preparation of the GPU changing process.

  • Switch off your PC and unplug it from the socket.
  • Disconnect all the power cables and other wires as it can mess up the process.
  • Wear an antistatic wrist strap to avoid static discharge.
  • Make sure all the power supplies are turned off and disconnected from the sockets.

Remove GPU from Motherboard – Step-By-Step Guide

Let’s start the graphics card changing process with easy-to-follow steps.

Step 1: Wear an Antistatic Wrist Strap

Wear an Antistatic Wrist Strap

To prevent static discharge, wear an antistatic wrist strap. This will help protect your GPU and other sensitive components from potential damage caused by static electricity. Attach the strap to your wrist and connect the other end to a grounded metal surface, such as your PC case.

Step 2: Locate the GPU

Locate the GPU

Identify the graphics card on your motherboard. It is typically located in the PCI Express (PCIe) slot, which is usually close to the CPU socket. The GPU is a large card with video outputs and a fan or cooling solution.

Step 3: Remove the Retention Bracket Screw

Remove the Retention Bracket Screw

On the rear side of the case, you’ll find a retention bracket securing the GPU in place. Use a screwdriver to remove the screw holding the bracket in position. Keep the screw safely aside, as you may need it later.

Step 4: Release the PCIe Slot latch

Release the PCIe Slot latch

Inside your case, look for the PCIe slot latch. This is a small plastic mechanism usually on the side of the PCIe slot. Gently press or pull it, depending on the design, to release the GPU from the motherboard.

Step 5: Carefully Remove the GPU

Carefully Remove the GPU

Hold the graphics card by its edges and gently lift it straight up from the PCIe slot. Be cautious not to apply excessive force or tilt the card while removing it, as this can damage the PCIe slot or the GPU itself.

Step 6: Detach Power Connectors

If your GPU requires additional power connectors, carefully disconnect them from the graphics card. These connectors are usually located on the side of the GPU and may include 6-pin or 8-pin connectors.

Step 8: Install the New GPU (Optional)

If you are replacing the GPU with a new one, follow the manufacturer’s instructions for installation. Align the new graphics card with the PCIe slot, secure it in place using the retention bracket screw, and reconnect any necessary power cables.

Congratulations! You have successfully removed the GPU from your motherboard. Store the old GPU safely or proceed with installing a new one if you are upgrading.

Anything Wrong Happened?

If you encounter any issues or observe anything unusual during the process of removing or replacing the GPU, it’s essential to take the necessary precautions and seek professional assistance. Here are some signs that something might be wrong:

Resistance or Difficulty Removing the GPU:

If you encounter excessive resistance or difficulty while trying to remove the GPU, do not force it. Check to ensure that you have released the PCIe slot latch and have removed the retention bracket screw. If the GPU still doesn’t come out easily, stop and seek assistance.

Visible Damage or Bent Components:

Inspect the GPU, PCIe slot, and surrounding components for any signs of damage, such as bent pins or broken parts. If you notice anything unusual, it’s advisable to stop the process and consult with a technician.

Static Electricity Discharge:

If you feel a static discharge or notice a spark, immediately stop the process. Reevaluate your antistatic precautions, double-check the wrist strap, and ensure that you are properly grounded before proceeding. Static electricity can damage sensitive electronic components.

Disconnected or Damaged Cables:

Verify that all power cables and connectors are securely attached to the GPU. If any cables are disconnected or damaged, do not proceed. Ensure that all connections are correct before powering on the system.

Error Messages or Malfunctions:

After reinstalling the GPU or turning on your PC, if you encounter error messages, display issues, or any malfunctions, it’s crucial to stop using the system immediately. These issues may require professional diagnosis and troubleshooting.

Umair Sajjad

Author, Product Reviewer

Umair Sajjad is an accomplished electrical engineer with a fervent passion for technology. With a keen eye for detail and a knack for problem-solving, he has dedicated himself to crafting and rigorously testing tech-related content for the web.